10.3 - Evaluating & Improving a Method
Sources of error and improvements
- A source of error is something in the method that makes a reading less accurate.
- Any error must be paired with a specific improvement that reduces it.
Common errors and their fixes
| Source of error | Improvement that fixes it |
|---|---|
| A short time measured by hand with a stopwatch, so your reaction time is a large share of the reading | Time twenty swings and divide by twenty, or use light gates instead of a stopwatch |
| A scale read from an angle, so the mark you line up with isn't the one directly in front of you (parallax) | Put your eye level with the scale and read it straight on |
| Hot water losing heat to the room during the run | Insulate the container and fit a lid |
Anomalies and repeats
- An anomaly is a result that doesn't fit the pattern of the others.
- Identify anomalies and leave them out when calculating the mean.
Why you repeat and take a mean
- It lets you spot anomalies that a single reading wouldn't show.
- Calculating the mean of several repeats reduces the effect of random error, so the mean is likely to be closer to the true value.
Representative samples
- A representative sample is needed when the property being measured isn't uniform.
- For example, a wire's thickness varies, so measure its diameter at several points along its length and at different angles, then calculate a mean.
TermDefinition
Source of error
Parallax error
Anomalous result
Random error
Precise
True value
Representative sample