2.4 - Components
Light-dependent resistors (LDRs)
- A light-dependent resistor (LDR) is a resistor whose resistance depends on the intensity of light falling on it.
- In darkness, its resistance is highest.
- As the light gets brighter, its resistance falls.
- Common applications: automatic night lights, outdoor lighting, and burglar detectors.

Thermistors
- A thermistor is a resistor whose resistance depends on temperature.
- In cold conditions, its resistance is high.
- As the temperature rises, its resistance falls.
- Because resistance falls as temperature rises, it's called a negative temperature coefficient (NTC) thermistor.
- Common applications: car engine temperature sensors, thermostats, irons, and fire alarms.

Sensing circuits with LDRs and thermistors
- An LDR or thermistor can be used in a sensing circuit to control another component as surroundings change.
- The supply's potential difference is shared between components based on their resistances: the larger a component's resistance, the larger its share of the potential difference.
Example - Thermistor controlling a fan
- The thermistor is in series with a fan, with a fixed resistor connected in parallel with the fan.
- As the temperature rises, the thermistor's resistance falls, so it takes a smaller share of the supply potential difference.
- The potential difference across the fan therefore rises, making the fan turn faster.

Example - Bulb across an LDR
- A bulb connected in parallel across an LDR shares the LDR's potential difference.
- In the dark, the LDR's resistance is high, so the potential difference across it is high and the bulb shines brightly.
- The bulb gets brighter as the surroundings get darker.

Diodes
- A diode is a component, usually made from a semiconductor such as silicon, that lets current flow freely in one direction only.
- In the reverse direction it has a very high resistance, so almost no current flows.
Forward and reverse bias
- Forward bias - The direction in which current can flow.
- Reverse bias - The direction in which the diode has high resistance and does not conduct.
- A diode doesn't conduct until the forward voltage reaches a specific threshold value.

Uses
- Used in electronic circuits, such as radio receivers.
- Used to turn alternating current (ac) into direct current (dc).
TermDefinition
Light-dependent resistor (LDR)
Thermistor
Diode
Forward bias
Reverse bias