9.2 - Solenoids & Electromagnets
Solenoids and electromagnets
Coiling the wire strengthens the field
- The magnetic field of a single current-carrying wire is fairly weak. It can be made much stronger by wrapping the wire into a coil.
- A coil of wire is called a solenoid.
- The field lines around each turn line up and add together, giving:
- A strong, uniform field inside the solenoid, where the field lines are parallel and evenly spaced.
- A field outside the coil that has the same shape as a bar magnet's.
- One end of the solenoid behaves as a north pole and the other as a south pole. Reversing the current reverses the poles.
- To find the north pole, curl the fingers of the right hand around the coil in the direction of the current. The thumb then points to the north pole (the right-hand grip rule).

Increasing the field strength
- Increasing the current through the coil.
- Increasing the number of turns of wire.
- Adding an iron core inside the coil.
The electromagnet
- Placing a soft iron core inside the solenoid greatly increases the magnetic field.
- The soft iron is easily magnetised to become an induced magnet while the current flows, and quickly loses its magnetism when the current is switched off.
- An electromagnet is a solenoid with an iron core: a magnet whose field can be switched on and off, and varied in strength by changing the current.

Plotting the field of a solenoid
- Place a piece of card across the middle of the solenoid.
- With a current flowing, sprinkle iron filings or use a plotting compass on the card to trace the magnetic field lines.
TermDefinition
Solenoid
Electromagnet