8.3 - V = IR Equation & I-V Graphs
Formula linking p.d., current and resistance
Where:
- = Potential difference, in volts (V)
- = Current, in amperes (A)
- = Resistance, in ohms (Ω)
The greater the resistance of a component, the smaller the current that flows through it for a given potential difference across it.
Finding the resistance
The equation can be rearranged to find the resistance of a component from measured values of potential difference and current:
Worked example - Current through a resistor
A 5.0 Ω resistor in a circuit has a potential difference of 9.0 V across it. Calculate the current through the resistor.
Step 1 - Identify the values
- Potential difference: V
- Resistance:
Step 2 - Rearrange V = IR to make current the subject
Step 3 - Substitution and calculation
The current through the resistor is 1.8 A.
Ohmic conductors and the V-I characteristic
- A V-I characteristic is a graph showing how the voltage (also called the potential difference) across a component changes as the current through it is increased - voltage on the y-axis, current on the x-axis.
- The resistance of an ohmic conductor, such as a fixed resistor or a metal wire, does not change with the current through it - as long as its temperature stays constant.
- For an ohmic conductor at constant temperature, the current is directly proportional to the voltage across it. This is commonly called Ohm's law.
Shape of the graph
- A component whose resistance stays constant gives a straight line through the origin.
- The steeper the line, the higher the resistance.
Finding the resistance from the graph
- Read the voltage and current at a point and use .
- For a straight line through the origin, the resistance is the gradient of the line.

V-I characteristic of a filament lamp
- Some components do not have a constant resistance, so their V-I characteristic (voltage on the y-axis, current on the x-axis) is a curve rather than a straight line. The filament lamp is one of these.
- As the current through a filament lamp increases, the free electrons collide more often with the atoms of the filament and transfer energy to them, so the filament heats up.
- As its temperature rises, the resistance increases.
- The resistance at any point is the ratio of the voltage to the current (), and this ratio gets larger as the current increases.
- Each extra amp of current needs a bigger increase in voltage, so the characteristic gets steeper as the current increases - giving a curve.
- The drawing shows the same curve with the axes the other way round (current up the side), so on it the curve flattens off instead.

TermDefinition
Ohmic conductor
Ohm's law